You can do it with the toilet thing
thats a lot of damage... try flexglue, ot even works under water
Bro let the glue dry you dingbat
Looks like u didnt make it hot enough nor didnu leave it on long enougj to dry all the way. But the main vid looked like a huge melted slob that was connected and yura were falling apart. Lol
At least let the glue dry out?
This guy gets mad when he doesn’t reach 100 miles in an hour after driving at 100mph
You used low temp hot glue. Try using high temp hot glue next time
Nope it now work
1) he didn’t melt it enough 2) he wasn’t holding the sticks close enough 3) he did wait long enough for them to cool 4) he cap
The best part of this guy run down of his mama's leg
You may you need to make the glue sticks bigger
Why don’t you use a toilet plunger?it will make good video content and will probably fix your car
These are brainless rich kids who are just doing crap.
You have to let the glue dry buddy
This is the type of kid that has a rubber band ball and no future
You're doing it wrong. Glue sticks need to be tight and flat together so it can all melt together as 1 piece and also cool down so it forms a strong connection. You had each individual piece slightly connected to the car. The success in getting out the dents is in the details and precision buddy..you were sloppy in your process.
You need to let it dry a bit and gotta be quick.
You heat up the sheet so the paint doesnt chip, Then you maybe let the glue harden. You Donut.
It works, you need to clean the area well with alcohol and then let the glue cool down for like a minute
Hot water on the car then a plunger
You need to let the glue cool down
Gotta use ramen you dummy
You need to let the glue dry a little more buddy
This guys the type to stop at a stop sign and wait for it to say go
The type of kid who can't gets the answers correct even for Dora's (the explorer) questions...XD
Hot glue is not strong
You're suppose to let them dry first maybe?
5 min crafts is just bullshit. They fake all their videos.
You are the reason why there's a advice saying "contains eggs" in the egg box.
Use boiling hot water and a plunger
He needs to wait for it to dry
He didn't let it cool down if he did then it would have been fine
U Gotta let it dry then pull it
This is your only stupid video, but the rest are awesome
Did you try to let it dry tho? Idk if that would make a difference haha lol
This is indeed cap 😂
Yea let it cool down and it should work
Goddamm bro... How bout you melt MORE glue at a time and let it cool down and harden MORE before you pull?? Lemao
Because you have to heat that body part too.
Maybe I should of let it dry 😂
U have to wait a little bit
This is the guy who eats a kit kat hole🤣 why on earth did he do that to his car!!!
Just wait the glue stick to stick in but not that stuck then pull
He did not have any patience let it cooldown then try, I bet you will get a different outcome
Let the glue cool off
Try it with boiling water and a plunger
Yo get a toilet plunger. 80% of the time it works every time.
It's not cap you must leave the sticks on the car for some time
Use a plunger instead
Just pour hot water on the dent but you need a lot and it has to be boiling hot my mom did that
And it doesn't get called 5 minutes craft for nothing you need to wait 5 min prob lol
Maybe put them on the dends and wait for a moment then pull sorry for bad english
You have to let the glue cool down my guy
Rule 1 never ever trust 5 minute crafts
YOU ALSO NEED TO HEAT THE VURVED PART OF THE CAR
Why would you put dents in the car anyway, I bet that car is in moderate condition and this guy just ruined it
Maybe let the glue cool down you peanut. Wow. The lack of simple thought in this video was just pathetic.
Five minute craft is you have to wait five minutes
You had to pull it really hard
I agree. He didn't let it cool. What a waste.
He needed to warm up the metal first then let the glue dry i do autobody its how we do it at the shop
Use gorilla glue
you have to let the glue dry lol
It’s cold it looks like, you have to heat up the metal for it to be able to move
You probably need to wait a while not wait 5 seconds
Leave it on for a minute it works
This guy is a clown
This is the guy who uses TikTok
I think it only works on person who can patiently wait for the glue to cool off
Use the pump for the toilet idk how it's called
imagine having so much privilege to ruin your damn car
Just use boiling water
You didn't let the glue to settle like in the video
Why the Tahoe
It don’t work on a mamalona they were using the Fagmobile
He didn’t let the glue sit there bro .
Not a big dent
Try a plunger
This guys the reason they have to list almonds as an ingredient in almond milk
U have to dump boiling water on the dent it helps i think 🤔
Why would make another dent 🧐
Omg you had to let the glue dry for a while. Not put it on then pull it right away
It works on china cars
its not even cap i could see that working if you let it cool down for a while
Why do people think the guy is stupid or what ever for trying it it’s clearly a joke post because some random person commented on another video that the glue sticks would fix his car but it didn’t and at the end he called it cap and laughed
Bigger dents are easier to ger out lol
these SEnewss shorts are killing me 💀😭
Literally every roast in the comments is from another comment section 😂
This the type of guy that eats Cheeto puffs and touches his controller without cleaning them
This the type of guy who buys a puppy and expects it to be fully trained.
Mans is impatient asf
Wait for the glue to dry alittle
“THIS IS INDEED CAP”😭😭