After Sitting 20 years will this Big old Wheel Loader Drive 3 miles home!?!? Pt.2

Publicerades den 3 apr 2021
Lin Boucher- Artist linboucher.com
-Follow me on Instagram & Facebook @dieselcreek to see what I'm up to before it hits SEnewss! #DieselCreek
-Help support the channel using these affiliate links!
American Made tools from IPA Tools here: ipatools.com?ref=861
or
Get some sweet gear from Yankum Ropes here!
yankum.com/?afmc=dieselcreek
Plus use the code dieselcreek at checkout for 5% off your purchase!
-If you’d like to help get the Autocar back on the road you can help out here: www.patreon.com/DieselCreek
OR send a One Time Contribution Via PayPal to DieselCreek@gmail.com
-Custom Music made for me by Vinnie Longhi of the Semi-Supervillains
Check them out here: senewss.info

Kommentarer

  • Hey yall! I know there is a few rough spots in the audio! I apologize for that, not sure what went wrong but please bare with me it doesn't last long. Hope ya like it!!!

    • @Bluntly it’s the very first line in the description linboucher.com

    • Whats the gals info for that painting? Don't see it in the description. Can you please edit info

    • can't wait to see.updates on this beast put a new exhaust pipe on it so comes out top not the side of it good luck MATT

    • @Shane Schlievert I think he's on the Ohio side of PA.

    • @Every thing I can video PA. Read the logo on the bucket arm (OH).

  • You definitely deserve more subscribers, like 2 million more. Thank YOU for filming and posting this stuff.

  • You are living what many consider to be the American Dream. Not getting rich in the stock market gambling casino but by adding economic value with the sweat of your brow and the cleverness of your mind. Having a big piece of land where nobody comes and tells you your lawn is too long or your mailbox needs to be painted is a big part of that dream. Anyone can do this. People should stop complaining about the corrupt system and go live their lives doing what they love because life is so short. G_d bless you for sharing your experiences with everyone and I hope you prosper on social media as some kind of recompense for the extra effort that it takes to share with others.

  • What part of PA you in

  • 500

  • I particularly liked that part were you said you could have got it for less than $1500 but you choose for it be a fair deal for both parties. That speaks volumes about who you are as a person 👏👏

  • Awesome. Why do people dislike these videos? Environmentalists? 😦

  • hydraulic lines about $288 each

  • Really enjoy the videos I had to go back & watch the first just to get up to speed & thanks for taking us along with you for the journey ! From a new subscriber I really appreciate the fact that you took the time to do this for us.

  • "cuz it was broken clean in half" it was broken clean in half by you

  • Lol. You sure aint no lets dig 18 or dirt perfect lol

  • Says his farm is just around the ways.....proceeds to drive it halfway across America.

    • @Diesel Creek ha ha. I know but seemed like a long time.

    • 3.2 miles

  • Who something crazy put for new tires on that beast so we can actually push and pick up dirt.

  • fix the exhaust!

  • It was fun seeing this thing come back to life. nice job

  • You lucky man. Well done.

  • I would like your channel a lot more if, there was not so many ...ad's.

  • Just to get it moving is costing hundreds and you know what you are doing.For a machine that has been sitting for so long and to get it working is fantastic.

  • Now, Matt, you want to get rid of me ......? Look beside helping for the roof, I will do plenty of other work and if you are renting me per day you will make good money and I am staying with you......? So let me stay with you please !!! Matt I think she is right, just keep her and rent her to make some money for repairs and maintenance !!! Warm regards friend !!!

  • My friend Matt !!! SEE that machine is telling you " if no roof at big workshop, I stay right here I will not move I want the roof !!! " I agree with this old loader, just like me !!!!

  • Better to long. Than to short. Regarding ya hoses. 🤗 What the universal joint brand on your dewalt driver Like ya Jpay dirt cap 🧢 New fan from over the pond Uk 🇬🇧

  • You got a Amazing Awesome of a loader enjoy

  • Now this is Amazing you got a awesome toy helper around the property keep it up you got a peace of great equipment for those heavy jobs out there.

  • Should let it warm up some before ravin like that. .

  • Your tires are in those holes my Brother try getting it running enough to rock it out or push or pull out but like that no it’s not moving but I’m sure it will come out . That be cool to have around move stuff move dirt then give it a pretty cool paint it already looks cool.

  • You gotta do a re-paint the front end loader video

  • $1500 usd man deal of a lifetime you did good bro. It needs a nice yellow paint job to top it all off. That dozer must be like...yeah I'm doing it again...

  • I love this video, wish it were my doser. The awesome job you did to revive it was good to watch bro. Thanks for the upload

  • Duuuude, what a deal. Totally worth it.

  • 10000 usd

  • 200K - You should do a complete bare metal restoration. Make it better then brand new!!!!

  • I subbed. Lil bit of countryside ASMR is GOOD 👍

  • Keep making videos! I felt like I learned something! Subbed

  • Русских не победить !

  • She definitely needs new tires or if there thick enough hot cut them some new jagged knobs

  • "We cant afford the tire guy on this build..." 5 mins later " Well the tire guys here". LMAO

  • Seemed like a 10 mile trip !

  • you never CHECKED the axle fluids.. differential

  • A ,C version ??? , usually a "C" has a cummins L10 or a detroit 6v71 , also front fenders on c versions usually square angled not curved. Unless this is a very early c version

  • Im loved to this machine for first look, absolutely incredible, its a beast who deserve to care of them. Thank you for whis amazing video. Sorry for my english.

  • You have a new subscriber Mi love your content, is AMAZING.

  • Love your work! What a bargain...but you won’t part with it, it’s to good! 😂

  • Nice Job recovering that old loader 👍😎👍

  • Hell of a buy ! I’d buy it for that price as well other than I don’t have anywhere to put it !

  • Buy a scrap tank. Great video, follow is there💪🏻

  • Will we get a restoration video (series)?

  • 1500$ was a crazy low price. Good find and great work getting the thicc girl home 👍🏾

  • Using a drill as an impact driver?

  • greetings from italy waiting for more videos

  • Good job!!!! Greetings from italy waiting for more videos

  • In my opinion you got a really, good buy!

  • I fixed a pair of similar size rams in comparable condition using fine emery tape wetted with diesel.

  • you are good

  • Sorry to write a second time. My dad's contracting firm had a '60s vintage Michigan 75 non-articulating loader that I just loved (rear wheel steer). It was the coolest looking machine. It was operated by a wonderful 'good old boy' with the improbable name of Stomper Skeeter. He was a cracker jack on that loader. He would drive it across town backwards as though he were driving a caddy! I loved it so much, that I'd sneak up on that Michigan loader whenever I could and start moving some dirt around. I was just a kid, so it's lucky I didn't drive it into something. I loved the sound of that Detroit Diesel two-stroke engine too. Your loader brings back great memories, even if that Cummins motor is a four-stroke one. These 175's and 275's were used often on large diameter sewer and storm water pipeline projects.

  • Those Clark and Michigan loaders used to have GM two-cycle diesel engines. Your Cummins motor sounds like it's probably four-cycle (?). For your reader's sake, here's a working Trojan loader with a Detroit Diesel two-stroke engine. As you might expect, they're higher pitched. The two-cycle engines made them accelerate faster, in my experience. Correct me if I'm wrong, but I think two-cycle diesel engines have pretty much been banned for air quality reasons. They were noisy too. senewss.info/slow/hbOtg7WYjaaao6o/video

  • @12:06 Is working woohoo!!! Now paid me 😂

  • عمل متقن وممتع

  • 1500 ??? That price right there is worth investing a couple parts and some love ! I think this loader deserve some level of renovation and some care.... Its good to see someone do care about that kind of machines :) 2 years ago i helped retrive and restore Komatsu wa180 after side flip in the woods... don't have details of how this happened but it sat there for 9 years....

  • $1,500 you stole it. Now the work comes

  • It needs ad blue ha ha

  • Wow ! You got a great deal . My guess less than 3k in a badass loader like that 💪👍

  • That would make a nice daily driver in the city :)

  • So strange this big ol machine was just a abandoned for 20 years ... good to see it back up and running and back on the road. Your mechanical skills have real market value, and you've recovered your costs thru this video.

  • Awesome job !!! I love the old iron also. Great channel.

  • Some better treaded tires would help out alot 😁looks like its driving on slicks.🤔

  • it will be nice if you tell us how much you spend and how much profit you get

  • Totally awesome machine and at a great deal! Good job with what you did too brother

  • Matt you can't sell her - she belongs at your place, you can just tell. Besides, you have a dump truck - an excavator - a dozer - a grader, and now a loader. Not to mention the low boy trailer and Autocar combination to haul the complete set around! Nice secondhand gig, with you & your equipment, to make some "toy cash". Just saying.

  • If you used that thing to push snow, you'd be ahead. Good damn work!

  • Looks like a nice drive through the smokies to me

  • I paid a lot more for a second hand car, a lot lot more, so i think you did just fine, as you say just a quick blow over with a spray gun and skme tyre black on the wheels and it will look ten times younger. I would hate to have to pay for the fuel alone as these things drick it like mad , sso heres in hope you find a buyer, as you say the engines fine and a recon engine for a car will cost you three times what you paid!!!!!!

  • Love it. Awesome. Any new updates on the old autocar? I know it's off the subject but just curious.

  • I have an old Trojan 3000 loader with a Cummins C195 engine in it. The tractor is a 1967 and is in pretty good shape for the age. It recently started leaking oil. Turned out to be a head gasket. Cummins quit making the gasket in 2001. I have searched all over the internet for a gasket and they just don't exist. Now its either scrap the loader or re-power it. The old iron is cool, but it can be a real headache to keep them running once parts become obsolete. My tractor weighs about 17 tons so scrap value is only about $3000 after a lot of work processing it down to manageable sized pieces, or spend several thousand on a different engine that you can still get parts for. Its kind of like being in-between a rock and a hard place. Not sure what to do....its too good to scrap but not so good that I want to put a bunch of money in it.

  • My heart sank when he started to talk about scraping her

  • You should use same connectors (I think they make price), new pipe and muff only.

  • Pretty decent flip. Repairs are an ouch!.parts are only made for that loader.like when you buy a fancy camera oh did you want a battery with that. Supply and demand

  • Just like to say that thing is Awsome, I just bought a used MF industrial 30e and it's not as big as your's. ha, love your videos keep doing what you do.

  • It runs good it’s a gem 💎

  • Man....that was the longest three miles ever...

  • And in that case I won't mind getting your contact if you will be willing to sell it to me pl contact me and if you are having similar machines elsewhere please involve me thanks Alex

  • My Name is Alex and I am Far away in Nigeria West Africa I wouldn't mind buying it from you if you may want to sell it anyway

  • Good morning

  • That’s so cheap

  • This loader is definitely better than the initial experiences you had with the Killer Grader. Good potential in this machine. Maybe a rock/gravel/mulch yard would want this. Don't think they would overload it, for sure.

  • The asking price is meaningless. What do they SELL for? But I think it's worth quite a lot. That's a nice machine if you need one.

  • Brakes are so overrated. If you know what you're doing you don't really need them.

  • Air over hydralic disc brakes

  • what was the plan if it died on the road?

  • Great channel! I would like to see more on the church Reno when you get a chance!👍🏻🇺🇸🇺🇸

  • I’ve never touched a Diesel engine in my life, and this video series to make me get started trying.

  • The whole video was awsome mate im in the UK and I share your passion on reusing and not scrapping keep the videos coming

  • Subscribed and set the bell on receiving full notifications ;)

  • Farmers are the same the world over - a yard full of old stuff.

  • $400

  • Thats a protest in itself. Crushing a tree with a huge diesel machine lol

  • Congrats Brother!!! Awesome job!!

  • Maaad props for bringing it back bro. Am a mechanic from Trinidad in the Caribbean and its my passion to resurrect these beasts from the dead. Keep it up Diesel Creek👍👍👍

  • 1500!!!!!!! Jeezus I would have given her more than that lol, but up here in cananda where I’m at this thing would be like 20-30 thousand Canadian dollars in Working order

  • I wish my '64 El Camino would sound like that loader....would love to wake up the neighbours every day !

  • It's worth 1500 just in scrap.